|Operation method||Bipolar constant current pentagon drive|
|Applied Motor||5-phase stepper motor|
|Resolution||FULL STEP(1-division), HALF STEP(2-division)|
|Max. Run Current||1.5A/Phase|
|Max. Current Consumption||3A|
|Number Of Axes||1-axis|
|Input pulse characteristic_pulse width||Min. 10㎲(CW, CCW), Min. 1ms(HOLD OFF)|
|Input pulse characteristic_Duty Rate||50%(CW, CCW)|
|Input pulse characteristic_Rising/Falling time||Below 130ns(CW, CCW)|
|Input pulse characteristic_Pulse input voltage||[H]: 4-8VDC , [L]: 0-0.5VDC|
|Input pulse characteristic_pulse input current||7.5-14mA(CW, CCW), 10-16mA(HOLD OFF)|
|Input pulse characteristic_Max. input pulse freq||Max. 50kHz(CW, CCW)|
|Environment_Ambient temperature||0 to 40℃, storage: -10 to 60℃|
|Environment_Ambient humidity||35 to 85% RH, storage: 35 to 85% RH|
|Weight||Approx. 183g (approx. 130g)|
※When using over 30VDC power supply, torque characteristics are improved but the driver temperature raise. The unit should be installed at the well ventilation environment.
※Max. current consumption: Based on ambient temperature 25℃, ambient humidity 55%RH.
※RUN current varies depending on the input RUN frequency and max. RUN current at the moment varies also varies depending on the load.
※In case of MD5-HF14-AO, MD5-ND14, there are no DIVISION SELECTION, ZERO OUT function.
※Max. input pulse frequency is max. frequency to be input and is not same as max. pull-out frequency or max. slewing frequency.
※The weight includes packaging. The weight in parenthesis is for unit only.
※Environment resistance is rated at no freezing or condensation.